Cargo · Vegetable oils

Palm oil and vegetable oil bulk shipping notes

Control palm oil carriage and heating temperatures according to the specific grade and cargo instructions, and check suitability documents, previous cargoes and cleanliness standards. Previous cargo and pipeline residues can contaminate the next cargo; include them in tank allocation and cleaning plans.

Temperature basis

Specific grade and cargo instructions

Disclosed

[S1]

Suitability check

Certificate of Fitness limits permitted cargoes

Disclosed

[S2]

Previous cargo and cleaning

Check previous-cargo history and cleaning standards separately

Disclosed

[S2]

Cross-contamination risk

Consider both tanks and pipelines

Disclosed

[S3][S4]

Properties and data scope

PropertyValue or scopeUnitTag and source
Grade and property data scopeCheck density, melting point, flash point and viscosity against actual cargo information—Disclosed
Carriage and heating temperatureFAO/WHO 2015 Table 1, Palm oil: storage/bulk shipment 32–40°C; loading/discharge 50–55°C. Other grades are listed separately; check cargo instructions.—Disclosed[S8]
Cargo-contact materialsTank and pipeline materials must be compatible with the cargo—Disclosed[S4]

Cargo documents and tank requirements

The MEPC.318(74) Chapter 17 entry is Palm oil, with pollution category Y in column c, ship type 2(k) in e and tank type 2G (integral gravity) in f; column o lists 15.19.6, 16.2.6, 16.2.7 and 16.2.9. Palm olein and palm stearin have separate entries; check the exact cargo name.[S6]

Assess each cargo against the Certificate of Fitness, previous-cargo history and cleanliness standards. Footnote k refers to MARPOL Annex II 4.1.3: an administration may grant the vegetable-oil exemption, requiring type 3 compliance except for cargo-tank location. The full tank length must be protected by ballast tanks or non-oil spaces, at least 760 mm inboard of the side shell. Bottom separation is at least the lesser of B/15 or 2 m, with a 1 m minimum. The certificate must record the exemption; type 3 carriage is not automatic.[S2][S6][S7]

Temperature control, pipelines and cleaning

FAO/WHO CAC/RCP 36-1987 (2015 edition) Table 1 gives temperatures by grade. Its Palm oil ranges must not be assigned directly to palm olein, palm stearin or other vegetable oils. Set carriage and heating arrangements from the specific grade and cargo instructions.[S8]

Check previous-cargo acceptance, tank-wall cleanliness and pipeline cleaning separately. Vegetable-oil residues can affect subsequent cargoes; tank-wall appearance alone does not establish pipeline cleanliness.[S3]

Consider previous cargoes and cleanliness requirements when planning the cargo sequence, before tank history or cleaning arrangements conflict with the next cargo.[S2]

Quality and compatibility risks

Check food-grade palm oil previous-cargo acceptance and cleanliness criteria against the cargo contract and supplier requirements; this page does not assign universal residue limits. A previous-cargo list does not replace cleanliness acceptance or vessel suitability documents.[S2]

Chemical-tanker materials and pipelines must be compatible with the cargo; assess contamination risks between previous and subsequent cargoes separately.[S4][S3]

Questions

Is all palm oil carried at one temperature?

No. Determine carriage and heating temperatures from the specific grade and cargo instructions.

Can one density or melting point represent all palm oil?

Check property values against actual cargo information; do not apply universal values to different palm oil cargoes.

Do clean tank walls rule out contamination of the next cargo?

No. Previous-cargo history, pipelines and cleanliness acceptance criteria require separate checks.

Does the integral gravity tank example establish a mandatory tank type for palm oil?

No. A typical application does not replace product-entry and suitability-document requirements.

Sources