Cargo · Alcohols

Ethanol bulk shipping notes

Ethanol is a water-miscible, low-flash-point liquid; use extinguishing media suitable for alcohols and plan cleaning and wall wash tests according to previous cargoes and acceptance criteria. IBC Chapter 18 lists ethyl alcohol as a pollution category Z product; carriage outside the IBC Code remains subject to MARPOL Annex II. Check the current MEPC.2/Circ list and the ship's documents.

Closed-cup flash point (anhydrous ethanol)

12°C

Disclosed

[S1]

Boiling point (anhydrous ethanol)

78°C

Disclosed

[S1]

Relative density (water = 1)

0.79

Disclosed

[S1]

Water solubility

Miscible

Disclosed

[S1]

Foam type

Alcohol-resistant foam

Disclosed

[S1]

Properties and data scope

PropertyValue or scopeUnitTag and source
Data applies toICSC 0044: anhydrous ethanol—Disclosed[S1]
CAS number64-17-5—Disclosed[S1]
Closed-cup flash point12°CDisclosed[S1]
Boiling point78°CDisclosed[S1]
Melting point−114°CDisclosed[S1]
Relative density (water = 1)0.79—Disclosed[S1]
Vapour pressure (20°C)5.8kPaDisclosed[S1]
Explosive limits in air3.1–27.7% volDisclosed[S1]
Water solubilityMiscible—Disclosed[S1]

IBC listing and applicable rules

MEPC.318(74) lists Ethyl alcohol in IBC Chapter 18 as pollution category Z, without ship-type or tank-type columns. Section 18.2 retains administration-prescribed safety requirements and 18.3 retains MARPOL Annex II requirements. Check the current MEPC.2/Circ list and exact cargo name for carriage.[S5]

ICSC 0044 property and fire-hazard data apply to anhydrous ethanol. Check the applicable NLS certificate under Annex II regulation 9 and the approved P&A Manual required by regulation 14. If a Certificate of Fitness substitutes for the NLS certificate, verify recognition under regulation 7. The Chapter 18 listing does not replace actual cargo documents.[S1][S6]

Cleaning acceptance when changing from oil to ethanol

When changing from oil to ethanol, plan cleaning from the previous cargo, tank condition and the cargo acceptance criteria. Check the need for WWT, test parameters and thresholds for each cargo; this page does not assign universal WWT acceptance values.[S3]

After freshwater rinsing, use the enclosed-space permit and test oxygen, flammable gas and toxic gases before wall wash sampling. Determine rinse-water classification, collection and destination from previous-cargo residues and approved vessel documents; a chemical next cargo does not reclassify previous oil washings.[S3]

Fire protection and compatibility

ICSC lists alcohol-resistant foam, water spray, powder and carbon dioxide as extinguishing media. Check the medium against the vessel’s approved system, actual cargo and latest flag/class requirements; no universal foam formulation is specified.[S1][S4]

Anhydrous ethanol can react violently with strong oxidants. Use closed systems, ventilation and explosion-proof equipment; do not use compressed air for filling or discharging. Do not assign these anhydrous properties directly to aqueous or denatured mixtures.[S1]

Questions

How is ethanol listed in IBC Chapter 18?

Ethyl alcohol is listed in Chapter 18 with pollution category Z. Carriage outside the IBC Code remains subject to MARPOL Annex II; check the current MEPC.2/Circ list and the ship's documents.

Does the 12°C flash point apply to every ethanol mixture?

No. ICSC 0044 concerns anhydrous ethanol; use actual cargo information for aqueous or denatured mixtures.

Does every oil-to-ethanol change require the same WWT?

Determine WWT parameters and thresholds from previous cargoes, cleanliness requirements and acceptance criteria; do not apply a universal standard.

Is AR-AFFF the only suitable foam?

ICSC lists alcohol-resistant foam and other extinguishing media; check the choice against the vessel’s approved system, actual cargo and latest flag/class requirements.

Sources