Ship squat estimator

Estimate maximum squat and remaining UKC using S_max = K × Cb × V² / 100 metres. Estimate only. Follow the ship's own data and the pilot's advice; do not use it for ship handling decisions.

Estimate only. Follow the ship's own data and the pilot's advice; do not use it for ship handling decisions.

Inputs

Synthetic data

Estimate

Maximum squat S_max (m)
0.80
H/T
1.20
Remaining UKC (m)
1.20
K
1

Warning bands are screening prompts, not universal safe limits; fixed K does not model actual blockage.

How to use it

  1. 1

    Enter ship and depth data

    Enter Cb, static draft T and water depth H; use metres for draft and depth, with depth greater than draft.

  2. 2

    Use speed through water

    Enter V in knots; the open-water approximation is Cb × V² / 100 metres.

  3. 3

    Choose a fixed-K mode

    This tool uses K = 1 for open mode and K = 2 for confined mode. Svetak (2001) presents the confined approximation 2 × Cb × V² / 100 metres for blockage factors of 0.100–0.265. The fixed setting does not calculate actual blockage and cannot establish applicability to every channel.

  4. 4

    Review squat and clearance

    H/T = water depth / static draft; remaining UKC = H − T − S_max. Review warnings against ship and waterway data.

Scope

  • Estimate only. Follow the ship's own data and the pilot's advice; do not use it for ship handling decisions.
  • Fixed K is a simplified setting; Barrass empirical equations have different constraints, and two coefficient settings cannot replace actual channel geometry and ship data.
  • The tool’s Cb, H/T and speed prompts are for screening only; they do not establish a validated range, equation validity or a safety threshold for the fixed-K approximation. Assess against vessel data, actual channel conditions and local requirements.
  • UKC deducts only estimated squat and excludes waves, heel, trim corrections and depth uncertainty; assess actual clearance using local methods.

Worked example

Synthetic dataCb 0.80, speed through water 10 kn, draft 10 m, depth 12 m, open mode
Fixed K
1
Maximum squat
0.80 m
Depth-to-draft ratio H/T
1.20
Static under-keel clearance
2.00 m
Remaining UKC
1.20 m

All inputs are synthetic data. The same inputs in confined mode give squat of 1.60 m and remaining UKC of 0.40 m.

Questions

Is V speed over ground or through water?

This tool uses speed through water in knots.

Does confined mode represent every channel?

No. K = 2 is a fixed tool setting; actual blockage ratio, depth effects and channel geometry are not solved.

Why does the tool show a result with warnings?

Warnings are screening prompts while the inputs remain calculable; a zero or negative UKC explicitly warns that squat reaches or exceeds static clearance.

Can remaining UKC be used directly for ship handling?

No. The result deducts only simplified estimated squat; follow ship data, pilot advice and local assessment methods.

Sources