Guide · Crew competence

STCW Crew competence: functions, levels and familiarization

Updated 2026-10-11 · About 7 min read

In one sentence

STCW sets minimum Crew competence by function and responsibility level, with appropriate safety familiarization and role training.

Convention, Code and minimum competence tables

This page uses the STCW Convention and Code amendments from the 2010 Manila Conference, explaining only the reviewed qualifications, structure and personnel scope; it does not claim to review all later course amendments. Code Part A is mandatory and Part B is recommended guidance; check the current text and flag-state scheme for actual certification and courses. This page explains the provisions and concepts reviewed, rather than a complete current consolidated text. For application, check the latest text, applicable flag requirements and company procedures.[S1][S2][B1]

Mapping functions, responsibility levels and KUP to roles

The Part A introduction lists seven functions: navigation, cargo handling and stowage, ship operation and care for persons, marine engineering, electrical/electronic/control engineering, maintenance and repair, and radiocommunications. Responsibility levels are management, operational and support. Check the standard for the function and level undertaken, rather than relying on a job title.[S2][B1]

Competence tables such as A-II/1 and A-III/1 include competence, knowledge/understanding/proficiency (KUP), demonstration methods and evaluation criteria. KUP is one column, rather than the entire table; learning content must be linked to competence evidence and evaluation conditions.[S2][B1]

Deck, engine and electro-technical qualification boundaries

For navigational watch qualification on seagoing ships of 500 GT or more under II/1, the approved training route requires at least 12 months of seagoing service including the prescribed onboard training and approved training record book; the alternative requires at least 36 months of approved seagoing service. Both require supervised watchkeeping, education, competence and other relevant requirements, rather than service months alone.[S1][S2][B3]

Engine watchkeeping, able engine support roles, ETO and electro-technical ratings require their respective qualifications; an ETO qualification is not equivalent to an electrician job title. III/6 requires an ETO serving on an applicable ship to hold a certificate of competency, rather than ordering every ship to employ an ETO; actual staffing depends on safe manning and flag requirements.[S1][S2][B4]

Additional training for ship types and designated duties

For oil and chemical tankers under V/1-1 and gas tankers under V/1-2, basic and advanced training depend on cargo or cargo-equipment responsibilities. Those directly responsible for relevant cargo operations must check the corresponding advanced requirements; everyone aboard is not automatically placed at the same level.[S1][S2][B5]

Non-passenger personnel employed or engaged on seagoing ships require appropriate safety familiarization or sufficient information and instruction before assignment to shipboard duties, rather than invariably before boarding. Crew with designated safety or pollution-prevention duties also require basic training in personal survival, fire prevention and firefighting, elementary first aid, and personal safety and social responsibilities. Designated survival craft, rescue boat, advanced firefighting and medical duties require their own standards.[S1][S2][B6]

Company checks of certificates, manning and ship familiarization

I/14 requires the company to ensure appropriate certificates, safe manning, refresher and updating training, personnel records, ship familiarization, coordination of critical functions and effective oral communication. Under A-I/14, familiarization with duties, equipment and procedures requires opportunity and sufficient time before assignment; certification does not replace familiarity with the actual ship.[S1][S2][B2]

Port-state checks under I/4 include appropriate certificates or dispensations and manning; with clear grounds, competence to maintain watchkeeping and security standards may be assessed. Qualification documents and practical competence require separate checks.[S1][S2][B2]

Questions

Is KUP the entire competence table?

No. KUP is knowledge, understanding and proficiency; the table also contains competence, demonstration methods and evaluation criteria.

Do safety familiarization and basic training cover the same people?

Not exactly. Non-passenger personnel engaged on seagoing ships need appropriate safety familiarization before assignment to duties; those with designated safety or pollution-prevention duties also need relevant basic training.

Does an ETO qualification mean every ship must employ an ETO?

No. Check the minimum safe manning document and flag requirements to establish whether an ETO is required.

What distinguishes the 12-month and 36-month OOW service routes?

At least 12 months must form part of an approved training programme with prescribed onboard training and an approved record book; the alternative requires at least 36 months of approved seagoing service and the other competence requirements still apply.

Sources